Banner-FW-05-01.jpg

FEATHERWEIGHT

Our well known Featherweight series offers silencers for every occasion.

Stalking in grasslands is different from hunting deer in forests and rugged terrain. The driven hunt of wild boar is different from posting of elk. Some people want a silencer built for maximum suppression and precision while others want a silencer designed for short response time and minimal impact on the weapon’s handling. Although our silencers are versatile, they also have their specialties. This way you can choose the best silencer for your need.

Product range-small-01.png

Featherweight 269// Precision and max suppression 

Even though it has a very high rate of suppression it only weighs a remarkable 269 grams. This light weight makes for excellent handle-ability and retains the natural balance of the rifle. This is a max suppression silencer. It eliminates muzzle flash effectively and gives minimum recoil. This is something that is crucial for hunting when it is dark at dawn and dusk.

SPECIFICATION

Suppression: 32-38 dB
Weight: Approx. 269g
Length in front of muzzle: 145 mm
Total Length: 224 mm
Diameter: 49.5 mm

Core: Titanium

Casing:  Hard anodized aluminum

Baffle stack and tube: Hard anodized aluminum

THREADS 
M13x1, M14x1, M14x1.5, M15x1, M16x1, M17x1, M18x1, M18x1.5

⁷⁄₁₆"28, ½”28, ½”20, ⁹⁄₁₆"24, ⅝”24

Spigot insert: M14, M15, M17

Threads of M15x1 and smaller have an inner tube that can accommodate barrels of up to 19.5mm. Threads larger than M15x1 can accommodate barrels of up to 22.5mm in diameter.

CALIBERS

Standard calibers

.22/6mm/6.5mm/7mm/.30/8mm/.338/9.5mm

Product range-small-03.png
Product range-small-04.png

Featherweight 196// VERSATILE

This is the silencer for those who want a versatile silencer. Weighing in at 196 grams it offers the suppression level of a full-size moderator in a small and remarkably light package. At this weight it has hardly any effect on the natural balance of the rifle. This makes it the ideal all-around moderator suitable for any hunting situation.

SPECIFICATION

Suppression: 29-31 dB
Weight: Approx. 196g
Length in front of muzzle: 109 mm
Total Length: 154 mm
Diameter: 49.5 mm

Core: Titanium

Casing:  Hard anodized aluminum

Baffle stack and tube: Hard anodized aluminum

THREADS 
M13x1, M14x1, M14x1.5, M15x1, M16x1, M17x1, M18x1, M18x1.5

⁷⁄₁₆"28, ½”28, ½”20, ⁹⁄₁₆"24, ⅝”24

Spigot insert: M14, M15, M17

Threads of M15x1 and smaller have an inner tube that can accomodate barrels of up to 19.5mm. Threads larger than M15x1 can accomodate barrels of up to 22.5mm in diameter.

CALIBERS

Standard calibers

.22/6mm/6.5mm/7mm/.30/8mm/.338/9.5mm

Featherweight 149// Active and ultralight


This is a silencer specialized for fast shots with short response time. Perfect for the driven huntin and stalking. Weighing only 149 grams, it has little effect on the rifle's balance. Although small, it is very effective when it comes to sound attenuation. Perfect for small calibers up to 308 win. Perfect for lightweight guns, dynamic shooting and driven hunts.

SPECIFICATION

Suppression: 27-29 dB
Weight: Approx. 149g
Length in front of muzzle: 109 mm
Total Length: 125 mm
Diameter: 44.5 mm

Core: Titanium

Casing:  Hard anodized aluminum

Baffle stack and tube: Hard anodized aluminum

THREADS 
M13x1, M14x1, M14x1.5, M15x1, M16x1, M17x1, M18x1, M18x1.5

⁷⁄₁₆"28, ½”28, ½”20, ⁹⁄₁₆"24, ⅝”24

Spigot insert: M14, M15, M17

CALIBERS

Standard calibers

.22/6mm/6.5mm/7mm/.30/8mm/.338/9.5mm

FW 88 - Folder-05.jpg

Featherweight 88// rimfire calibers  


The Featherweight 88 Is a silencer especially designed for rimfire calibers .22WMR, .22LR. .17 HMR.
It has an all metal construction designed and built for longevity. 
Aerospace 6061 T6 aluminum is used for the whole construction and it is hard anodized for maximum wear resistance. The result is an effective and light weight design that shares many of the design qualities of our larger models.

SPECIFICATION

Suppression: 35 dB
Weight: Approx. 88g
Core: Aerospace 6061 T6 aluminum
Total Length: 123 mm 
Length in front of muzzle: 113mm
Diameter: 32.5 mm

CALIBERS //  (.22lr+.22 lrm)  and in .17 hmr

THREADS // ½”20 and ½”28 Front mount
 

MAINTENANCE

Our silencers does not need much maintenance under normal conditions and and will last for a long time with the recommended maintenance.

After shooting, a silencer will be humid on the inside and it can take some days for it to dry if it is not opened. During this drying time the internal components can corrode. This is why we have designed our suppressors to be opened easily without tools. This also allows the suppressors to be oiled on the inside before shooting and thereby eliminate the so called  “first round pop”. 

 

Please note that putting too much oil inside will increase the amount of smoke (vapour) that comes out in the first shot. A dry, oiled suppressor can be stored mounted on the firearm.

GENERAL

Optimally maintenance should be done after each shooting session. Unscrew the front. For the featherweight models you should also take out the inner tube. This will allow the internal components to dry immediately. If for some reason it is not possible to open the suppressor, spray some gun oil inside  and let it dry.


Do not put the silencer into the dishwasher or use detergents for cleaning. This may damage the silencer. Oil works best for dissolving powder residue.

The featherweight line and the Freyr 280 Titanium have a slightly different construction, but even so they have the same maintenance procedure.

Vedlikehold-bildeserie-01.jpg

FEATHERWEIGHT  LINE

1. Front housing 

2. baffle stack tube 

3. Baffle stack

4. High-pressure chamber. 

Please note - The baffle stack and high-pressure chamber should not be disassembled.  

Vedlikehold-bildeserie-02.jpg

FREYR 280 TITANIUM
 

1. Front housing

 

2. Baffle stack 

3. High-pressure chamber.

Please note - The baffle stack and high-pressure chamber should not be disassembled.  

PROCEDURE

Vedlikehold-bildeserie-03.jpg

1.0pen the suppressor, spray plain gun oil on to the inside parts and into the rear chamber. 

 

2. Oil lightly and wipe the powder residues. When it comes to the Featherweight line you should pay special attention to the contact area between the inner tube and the baffle stack. If this is not done the inner tube will eventually stick to the baffle stack. 

3. Grease the threads before assembly. It is not necessary to clean the silencer completely.
 
4. Use silicon based o-ring grease for the o-ring at the front. “Molycote 111 for example” 

 

USE

With use of the silencer there will be a buildup of powder residue on its inside. It should though be noted that if water enters a heavily fouled silencer the powder residues will absorb water and form crystals. This should be kept in mind when hunting in rainy weather. A more thorough cleaning is then recommended beforehand. The silencer should  be disassembled for cleaning and inspection. Follow the guide above. If the suppressor is regularly maintained and threads lubricated this can be done without tools. It can then be cleaned by spraying the baffle stack and the inside of the outer casing with gun oil and wipe the dissolved powder residue off. Then oil the internal parts lightly and lubricate the threads before assembling. Verify that the O-ring is intact.

 A qualified gunsmith shall always fit the suppressor to the firearm. The suppressor must be suited for the caliber of the firearm. Caliber and thread are indicated at the front of the suppressor. The center hole of the silencer must be concentric with the bore of the firearm. This must be verified before using the firearm.

The rifle has to be zeroed after mounting the silencer. It is not recommended to shoot series longer than 20 shots without allowing the silencer to cool down. The silencers are intended for civilian use only. Always ensure that the silencer is in good condition and without damage and properly mounted before use. When using insulating covers, the cover should be removed between series to let the silencer cool down. Improper use may result in injury and damage to equipment. The silencer should be removed from the firearm after use and stored in a dry place in such a way that air can flow through the suppressor.